Marc Thomas / Publications récentes

Voir aussi site web personnel

Articles de périodiques

2009

Ayari, Houcine, Marc Thomas, Sylvie Doré, Rheda Taïar et Jean-Paul Dron. (2009) Predicting the adverse health effects to long term whole-body vibration exposure, Acoustique & techniques no 58, p. 44-52.

Ayari, H. & Thomas, M. & Doré, S. & Serrus, O. (2009) Evaluation of lumbar vertebra injury risk to the seated human body when exposed to vertical vibration, Journal of Sound and Vibration, vol.321, (1‑2), pp.454‑470.

Esmailzadeh, M., A.A. Lakis, Marc Thomas et L. Marcouiller. (2009) Prediction of the response of a thin structure subjected to a turbulent boundary-layer-induced random pressure field, Journal of Sound and Vibration, vol. 328, no 1-2, p. 109-128.

Mabrouki, F., Marc Thomas, M. Genest et A. Fahr. (2009) Frictional heating model for efficient use of vibrothermography, NDT and E International, vol. 42, no 5, p. 345-352.

Sun, Y. & Thomas, M. & Masounave, J. (2009) An experimental investigation of the dielectric properties of electrorheological fluids, Smart Materials & Structures, vol.18, (2), p.024004.

Thibault, D. & Bocher, P. & Thomas, M. (2009) Residual stress and microstructure in welds of 13%Cr‑4%Ni martensitic stainless steel, Journal of Materials Processing Technology, vol.209, (4), pp.2195‑2202.

2008

Ayari, H. & Thomas, M. & Doré, S. (2008) Development of an Injury Risk Factor for Drivers, Revue Internationale sur l’Ingénierie des Risques Industriels, vol.1, (2), pp.120‑138.

Bouzidane, A., et Marc Thomas. (2008) An electrorheological hydrostatic journal bearing for controlling rotor vibration. Computers and Structures. Vol. 86, (3-5), pp. 463-472.

Bouzidane, A. & Thomas, M. & Lakis, A. A. (2008) Nonlinear dynamic behavior of a rigid rotor supported by hydrostatic squeeze film dampers, Journal of Tribology‑Transactions of the Asme,vol.130, (4), pp.041102‑1‑041102‑9.

Esmailzadeh, M. & Lakis, A. A. & Thomas, M. & Marcouiller, L. (2008) Three‑dimensional modeling of curved structures containing and/or submerged in fluid, Finite Elements in Analysis and Design, vol.44, (6‑7), pp.334‑345.

Hallé, Stéphane, Sylvie Nadeau, P. Déry, P. Doucet, R. Gilbert, L. Gratton, A.D. Ngo, Jean Arteau, H.A. Bouzid, J. Brousseau, P. Dessureault, Frédéric Laville, Phieu Le-Huy, Françoise Marchand, Yvan Petit, D. Rodier et Marc Thomas. (2008) L'intégration de connaissances en santé et sécurité du travail en formation universitaire - le cas du génie mécanique. Hygiène et sécurité du travail, vol. 210, pp. 59-63.

Kerboua, Y. & Lakis, A. A. & Thomas, M. & Marcouiller, L. (2008) Vibration analysis of rectangularplates coupled with fluid, Applied Mathematical Modelling, vol.32, (12), pp.2570‑2586.

Kerboua, Y. & Lakis, A. A. & Thomas, M. & Marcouiller, L. (2008) Computational modeling of coupled
fluid‑structure systems with applications, Structural Engineering and Mechanics, vol.29, (1), pp.91‑111.

Ouhabi, A. Thomas, M. Kobayashi, M. Jen, C.-K. (2008) Structural Health Monitoring of Aerospace Structures with Sol-Gel Spray Sensors, Key Engineering Materials, vol.347, pp.505-510.

Sassi, S. & Badri, B. & Thomas, M. (2008) Tracking surface degradation of ball bearings by means of
new time domain scalar descriptors, International Journal of COMADEM, vol.11, (3), pp.36‑45 :ISSN
1363‑7681.

2007

Bouzidane, A., et M. Thomas. (2007) Equivalent stiffness and damping investigation of a hydrostatic journal bearing. Tribology Transactions, vol. 50, (2) (Apr-Jun), pp. 257-267.

Kerboua, Y., A. A. Lakis, M. Thomas et L. Marcouiller. (2007) Hybrid method for vibration analysis of rectangular plates. Nuclear Engineering and Design, vol. 237, (8), pp. 791-801.

Ngo, A. D. Hallé, S. Nadeau, S. Déry, P. Doucet, P. Gilbert, R. Gratton, L. Arteau, J. Bouzid, H. Brousseau, J. Dessureault, P. Gauthier, F. Laville, F. Le Huy, P. Marchand, F. Petit, Y. Rodier, D. Thomas, M. (2007) Le défi de l'intégration des connaissances en santé et en sécurité du travail - génie mécanique, Travail et Santé - volet articles de vulgarisation, vol. 23, (4), pp.36-39.

Ouahabi, A., M. Thomas, M. Kobayashi et C. K. Jen. (2007) Structural health monitoring of aerospace structures with sol-gel spray sensors. Key Engineering Materials, vol. 347, pp. 505-10.

Sassi, S., B. Badri et M. Thomas. (2007) A numerical model to predict damaged bearing vibrations. Journal of Vibration and Control, vol. 13, (11) (Nov), pp. 1603-1628.

2006

Kerboua, Y., A. A. Lakis, Marc Thomas, L. Marcouiller et M. H. Toorani. (2006) Dynamic Analysis of Coupled-fluid Structure Systems. WSEAS Transactions on Applied and Theoretical Mechanics, vol. 1, (2), pp. 265-274.

2005

Ayari, Houcine, Marc Thomas et Sylvie Doré. (2005) Développement d’un modèle statistique de prédiction de la durée de vie du rachis lombaire, dépendant de la contrainte appliquée, de l’âge et de la densité osseuse. Perspectives interdisciplinaires sur le travail et la santé. (PISTES). Vol. 7, (2).

Sassi, S., K. Cherif, L. Mezghani, M. Thomas et A. Kotrane. (2005) An innovative magnetorheological damper for automotive suspension: from design to experimental characterization. Smart Materials & Structures, vol. 14, (4) (Aug), pp. 811-822.

Articles de conférences

2008

Ayari, H. Thomas, M. Doré, S. (2008) Development of an Injury Risk Factor for Drivers, 1st International Conference on Industrial Risk Engineering, CIRI, Montréal, Canada, pp.137-150.

Guilbault, R. & Thomas, M. (2008) Prediction of Resonances of Thin‑Rimmed Cylindrical Gears from a
Sub‑Structuring Approach, Proceedings of the CSME Forum 2008, Ottawa, Canada, No 1569100493,
8 pages.

Vu, V.H. Thomas, M. Lakis, A.A. (2008) Le pont est-il fort? Réponse d'une technique d'analyse modale opérationelle, 42e Congrès de l'AQTR "Défi transport durable", Montréal, Canada, 17 pages.

2007

Charette, O. Champliaud, H. Thomas, M. (2007) FEM Calculation of Frequencies Variation Caused by Residual Stress Distribution in Welded Structures, The 18th IASTED International Conference on Modelling and Simulation (MS 2007), Montreal, Canada, pp. 446-451.

Li, J. Liu, Z. Thomas, M. Fihey, J.-L. (2007) Dynamic Analysis of Manipulators with Flexible Joints and Flexible Links, 5e Conférence internationale sur l'automatisation industrielle, Montréal, Canada, cédérom.

Ayari, H. Thomas, M. Doré, S. (2007) A Design of Experiment for Studying the Effect of Human Body Parameters on an Injury Risk of Drivers Exposed to Vibration, 37th International Conference on Computers and Industrial Engineering, CIE 07, Alexandria, Égypte, pp.620-628.

Badri, B. Thomas, M. Archambault, R. Sassi, S. Lakis, A. (2007) A New Method for Shock Detection and Time-Domain Classification, Proceedings of the 20th International congress on condition monitoring and diagnostic engineering management (COMADEM07), Faro, Portugal, pp.667-676.

Badri, B. Thomas, M. Sassi, S. Lakis, A. (2007) Combination of Bearing Defect Simulator and Artifical Neurl Network of the Diagnosis of Damaged Bearings, Proceedings of the 20th International congress on condition monitoring and diagnostic engineering management (COMADEM07), Faro, Portugal, pp.175-185.

Badri, B. Thomas, M. Archambault, R. Sassi, S. Lakis, A. Mureithi, N. (2007) A New Method to Detect Synchronous and Asynchronous Shock Data in a Signal, 1st International Conference on Industrial Risk Engineering, CIRI, Montréal, Canada, pp.625-636.

Badri, B. Thomas, M. Sassi, S. Archambault, R. Lakis, A. Mureithi, N. (2007) The Shock Extractor, 25th Seminar on Machinery Vibration (CMVA), Saint John, Canada, 11 pages.

Ouahabi, A. Thomas, M. Kobayashi, M. Jen, C.K. (2007) Structural Health Monitoring of Aerospace Structures with Sol-Gel Spray Sensors, Damas '07, Turin, Italie pp.505-510.

Sun, Y. Thomas, M. Masounave, J. (2007) Experimental Investigation of Dielectric Properties on Electrorheological Fluids, (International Conference on Smart Materials and Nanotechnology in Engineering, SMN '07) Proceedings of the SPIE, Harbin, Chine, vol. 6423, pp. 1-8.

Vu, V.H. Thomas, M. Lakis, A.A. Marcouiller, L. (2007) Multi-regressive Model for Structural Output only Modal Analysis, 25th Seminar on Machinery Vibration, CMVA, Saint John, Canada, pp.40.1-40.20.

Vu, V.H. Thomas, M. Lakis, A.A. Marcouiller, L. (2007) Identification of Added Mass on Submergeg Vibrated Plates, 25th Seminar on Machinery Vibration, CMVA, Saint John, Canada, pp.40.1-40.15.

Vu, V.H. Thomas, M. Lakis, A.A. Marcouiller, L. (2007) A Time Domain Method for Modal Identification of Vibratory Signals, 1st International Conference on Industrial Risk Engineering, CIRI, Montréal, Canada, pp. 202-218.

Vu, V.H. Thomas, M. Lakis, A.A. Marcouiller, L. (2007) Identification of Modal Parameters by Experimental Operational Analysis of the Assessment of Bridge Rehabilitation, 2nd International Operational Modal Analysis Conference, Copenhague, Danemark, pp.133-142.

Safizadeh, S. Lakis, A. Thomas, M. (2007) Machineery Diagnosis by Wavelet Analysis, Proceedings of the 20th International congress on condition monitoring and diagnostic engineering management (COMADEM07), Faro, Portugal, pp.417-424.

Komgon, N.C. Mureithi, N. Lakis, A. Thomas, M. (2007) On the Use of Time Synchronous Averaging, Independent Component Analysis and Support Vector Machines for Bearing Fault Diagnosis, 1st International Conference on Industrial Risk Engineering, CIRI, Montréal, Canada, pp.610-624.

2006

Gagnon, M. Tahan, A. Coutu, A. Thomas, M. (2006) Analyse modale opérationnelle en présence d'excitations harmoniques: Étude de cas sur des composantes de turbine hydroélectrique, Proceedings of the 24nd Seminar on machinery vibration, Canadian Machinery Vibration Association, éditeur M. Thomas, Montréal, Canada, pp.320-329, ISBN 2-921145-61-8

Badri, B. Thomas, M. Sassi, S. (2006) La détection de défauts de roulements par réseaux de neurones, Proceedings of the 24nd Seminar on machinery vibration, Canadian Machinery Vibration Association, éditeur M. Thomas, Montréal, Canada, pp.386-403, ISBN 2-921145-61-8.

Kotrane, A. Thomas, M. Sassi, S. (2006) Design of a magnetorheological suspension, Proceedings of the 24nd Seminar on machinery vibration, Canadian Machinery Vibration Association, éditeur M.Thomas, Montréal, Canada, pp.473-491, ISBN 2-921145-61-8.

Ouahabi, A. Thomas, M. Lakis, A.A. (2006) Détection de fissures de respiration de fatigue par excitation harmonique et analyse temps-fréquence, Proceedings of the 24nd Seminar on machinery vibration, Canadian Machinery Vibration Association, éditeur M. Thomas, Montréal, Canada, pp.460-472, ISBN 2-921145-61-8.

Ouahabi, A. Thomas, M. Lakis, A.A. (2006) Detection of damages in beams and composite plates by harmonic excitation and time-frequency analysis, Proceedings of the third European workshop on structural health monitoring, ed. Alfredo Guemes, universitad politecnica de Madrid, Destech publications inc., USA, Granada, Espagne, pp.775-782, SBN 1-932078-63-0

Sun, Y. Thomas, M. Masounave, J. (2006) Damping of rotor torsional vibrations with electrorheological fluids, Proceedings of the 24th Seminar on machinery vibration, Canadian Machinery Vibration Association, éditeur M. Thomas, Montréal, Canada, pp.344-369, ISBN 2-921145-61-8.

Vu Viet, H. Thomas, M. Lakis, A.A. (2006) Operational modal analysis in time domain, Proceedings of the 24nd Seminar on machinery vibration, Canadian Machinery Vibration Association, éditeur M. Thomas, Montréal, Canada, pp.330-343, ISBN 2-921145-61-8.

Kerboua, Y. Lakis, A.A. Thomas, M. Marcouiller, L Toorani, M.H. (2006) Dynamic Analysis of Coupled-fluid Structure Systems, Proceedings of the 2nd WSEAS international conference on Applied and Theoretical Mechanics, Venice, Italie, pp.249-258.

Sassi, S. Badri, B. Thomas, M. (2006) TALAF" and "THIKAT" as innovative time domain indicators for tracking BALL bearings, Proceedings of the 24nd Seminar on machinery vibration, Canadian Machinery Vibration Association, éditeur M. Thomas, Montréal, Canada, pp.404-419, ISBN 2-921145-61-8.

Badri, B. Archambault, R. Thomas, M. (2006) A new method to separate synchronous from non synchronous shocks in rotating machinery, Proceedings of the 24nd Seminar on machinery vibration, Canadian Machinery Vibration Association, éditeur M. Thomas, Montréal, Canada, pp.448-459, ISBN 2-921145-61-8.

Masson, P. Micheau, P. Pasco, Y. Thomas, M. Brailovski, V. Meunier, M. Peter, Y.-A Song, I.-H Mateescu, D. Misra, A. Mrad, N. Pinsonneault, J. Cambron, A (2006) Smart technologies for structural health monitoring of aerospace structures, CanSmart Workshop, Toronto, Canada, 12 pages.

Livres

Thomas, M. Laville, F. (2007) Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings. Montréal: École de Technologie supérieure, 656 p.

Thomas, M. Liu, Z. Bouthillier, É. (2006) Compte-rendu du 24e séminaire en vibration de machines, (CMVA), Montréal, Éditeurs : Thomas M. Liu Z. et Bouthillier É, 528 pages, ISBN 2-921145-61-8

Rapports techniques

2008

Badri, B. Thomas, M. (2008) Analyse modale expérimentale des rotors de débrouissalleurs, Phase 2, Denis Cimaf, Montréal, ETS, 11 pages.

Mabrouki, F. Thomas, M. (2008) Étude des vibrations d'un modèle de base de sécheuse, Phase 2, Montréal, ETS, 14 pages, MABE.

Mabrouki, F. Thomas, M. (2008) Étude des vibrations d'un modèle de base de sécheuse, Phase I, Montréal, ETS, 14 pages, MABE.

Badri, B. Ouahabi, A. Thomas, M. (2008) Analyse modale expérimentale des rotors de débrouissalleurs, Denis Cimaf, Montréal, ETS, 10 pages.

2006

Badri, B. Ouahabi, A. Thomas, M. (2006) Analyse des déformées en fonctionnement des installations de la station de pompage de Chateaufort, Montréal, Ville de Montréal, Octobre 2006, 26 pages.

Esmailzadeh, M. Lakis, A.A. Thomas, M. Marcouiller, L. (2006) Three dimentionnal modeling of curved structure partially or completely containing and or submerged in fluid, Comportement dynamique des plaques rectangulaires submergées EPM-RT-2006-06, Montréal, École Polytechnique, Juin 2006, 41 pages.

Ruban, T. Vu Viet, H. Thomas, M. Lakis, A.A. Marcouiller, L. (2007) Conception des structures d'essais d'interaction fluide-structure, Montréal, ÉTS, février 2007 49 pages.

Volta, T. Vu Viet, H. Thomas, M. Lakis, A.A. Marcouiller, L. (2007) Conception et réalisation d'un banc d'essais hydrauliques, Montréal, rapport technique ÉTS, février 2007, 56 pages.

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License